Hi,
For my PA I am using a time profile having following levels: 1) Day, 2) Week, 3) Month, 4) Quarter, 5) Year
I want the base planning Level to be at weekly. Is this possible? How??
Regards,
Indaarjit
↧
Using TimeProfile
↧
Doubt on activation: BSANLY_BI_ACTIVATION
Hello All,
in our company are going to start a new project, SAP, SAP HANA + BW + IBP Finance.
It is the first time that we carry out a project with IBPF, and we must activate the module of IBP for finance (/ERP/SFIN_PLANNING). We have begun to apply the note: 1972819
But leave us some doubts in this respect:
- 1. When we proceed to the activation of the "Content Bundle - BSANLY_BI_ACTIVATION", also are activated all BW objects to IBP such as: InfoObjects, InfoCubes, planning functions,...? Or turn separately?
- 2. Once activated the "Content Bundle", all objects are properly running HANA, created the "Attribute Views", "Analytic Views" to get the data?
Us would help a lot for our implementation, be able to have a step by step guide for configuring IBP for Finance, we have not found a guide for the parameterization of IBP Finance. So that would be very helpful for us.
Thank you very much for your help!,
↧
↧
Requesting information on execution of Inventory in S&OP PA
Hi,
I have copied an S&OP PA and I want to include inventory optimization in this so that an E2E process can be done.
Could anyone please suggest the config changes that must be implemented in this PA in order to achieve inventory optimization in S&OP PA? Also, please suggest the impact of the changes.
Regards,
Indaarjit
↧
Rolling Forecast - Offset for Forecast consumption
Hi Guys,
I wanted to set up / configure a rolling forecast consumption concept. For example :
February March April
Forecast 200 20 50
Shipped Qty 50 100 50
Rolling Forecast 150(200-50 From FEB) 70 (170-100)
New Forecast 170(150+20) 120
And So on.
So as shown above its clear that 200-50 is done and the result of the difference between forecast and shipped Qty is made available in the next Month Period ID as rolling Forecast(150). Then the result of this can be Added to current month forecast to calculate the New forecast for the month. Now the Rolling Forecast for the month of March would be 70 and this should reflect in April as a carry forward.. then the logic continues...
Looking forward to customization and calculation logic ( at all levels) help.
Thanks
Br
Arjun Kumar Rao
↧
Unable to Populate IOForecast from ConsensusDemand
Hi,
I am trying to implement an E2E scenario comprising of Demand, Inventory and Supply but I am not able to populate IO Forecast with values of Consensus Demand.
The ConsensusDemand KF is at PerProdCust level while IOForecast is at PerProdLocCustGroup Level.
Can anyone please help me with the probable configurations in this?
Regards,
Indaarjit
↧
↧
Enable effective dates in Master Data type
Hi all,
I have noticed a new feature in Master Data type Configuration :
It is possible to "Enable effective dates". Then, two attributes "Date from" and "Date to" are automatically created :
I didn't find any documentation on the subject, and I was wondering if this feature is compatbible with Supply Planning Operator?
If somebody has any knowledge to share on this subject, it would be appreciated !
Thanks,
Pierre
↧
Configuring Forecasting operator IBP 5, advanced feature missing in excel add-in
Hi,
I have configured the Forecasting Operator (IBFORECASTING) for my planning area. Request your guidance on the following points:
1. Where do I configure the alpha, beta, gamma values (in IBP 4.0, it was available in Forecasting parameters)
2. How do I enable the operator? When I login to the excel add-in , I do not find the forecasting operator in the control bar (or the other operators) I have configured. How do I run it through excel (its not available under advanced features either).
Thank you ,
Alok Joshi
↧
Does SAP have some IBP certification?
Hi, experts.
I would like to know if SAP has any IBP certification?
Tks!
Fábio Matias
↧
Network Visualization No Longer Showing Network or Data
Hello,
I'm using the SAP3 standard model and populated it with the Muesli sample data. As seen in the screenshots below, the Rec Safety Stock and TIP have values in the chart analytic, and the relevant master data elements are populated.
However, in the network visualization, it says there is no data. How do I generate the network diagram? Please also help me understand why Customer Group / Segment, Ship From ID, Component ID, and Source ID are null when they are populated in the master data.
Thanks for your help,
Will
Nothing Displayed in Network Chart
Why Null?
Master Data Elements Populated (Source Customer Group, Source Production)
Rec SS and TIP values Exist
↧
↧
How to check the status of snapshot jobs in IBP?
Hello experts,
There are few copy operators scheduled in our application.
Can someone let us know how to check the status of these copy operator jobs from excel or UI?
Click on the "Status" button in "Advanced" option in excel only shows few records and I couldn't sort it by date also.
Thanks in Advance
Anil
↧
Usage of Timestamp Attribute
Can someone help me in illustrating an example on how to use the Timestamp attribute?
Thanks,
Manaswini
↧
Requesting information on execution of Inventory in S&OP PA
Hi,
I have copied an S&OP PA and I want to include inventory optimization in this so that an E2E process can be done.
Could anyone please suggest the config changes that must be implemented in this PA in order to achieve inventory optimization in S&OP PA? Also, please suggest the impact of the changes.
Regards,
Indaarjit
↧
Statistical Forecasting in IBP 5.0
Hi,
I have run satatistical forecasting in IBP 4.0
However I am finding it challanging in IBP 5.0 . Not sure where to confure it. We have been able to copy SAP_IBP_PLANNER_APP into our roles and the tabs for statistical forecasting and supply planning are visible in the IBP excel ribbon
When we go to statistical forecast it shows us the following window:
We selected the time period as Monthly. Howevr we couldnt get anything in the "Forecast Model" selection pane. It was blank. Then we tried to run it. We got a message stating "Select a profile".
We are not sure where and how to select the profile in IBP 5.0.. Request your help.
Regards
Atri Kundu
↧
↧
SAP IBP Training In India
Hi Experts
Could you please share SAP IBP training centers provided SAP and SAP Partners for SAP IBP technology.
Kindly share list of SAP /SAP Partners providing SAP IBP training and Duration details also.
It would be great if could share the training cost with certification and training cost without certification.
Regards
Sudhakar
↧
Not able to populate Dependant Customer Demand Quantity
Hi,
We are working on a planning area which is a copy of SAP2. We have generated Consensus demand plan. We are able to populate Customer Sourcing Ratio for each time period in Prod-Loc-Cust planning view.
However we are unable to populate the dependent demand quantity at the DC which is a sourcing location for the customers. We ran the "Unconstrained Demand and Supply (No Shortage)" and tried to populate the values of dependent demand quantity. However we did not succeed. Not sure where we are going wrong. Please help.
Regards
Atri Kundu
↧
How to delete Master Data
Hello,
I am trying to delete Master Data in IBP and I am having some troubles, in particular on deleting a Customer Product in the planning area SAP2.
I have tried both methods:
- 1. Deleting this relationship Cust-Prod from excel (Master Data-->Manage-->Single-->Customer Product--> Select both and delete--> Ok and Continue)
- 2. Deleting form User Interface (Data Integration-->New Import Job-->CustomerProduct (S2customerproduct) --> selecting the file and getting a "Success" message when deleting.
After that, I have checked in Master Data-->Manage--> etc that the Customer Product has been deleted successfuly but the issue appears when opening a New Planning view and showing any key figure (like Total Saleable Qty) at Customer Product Level. Here I still see the Customer Product Data I had previosuly deleted.
Is there any Consistency Check procedure in IBP I have to execute? Is there any step I am missing?
Thank you very much in advance.
Regards,
Josep Tomas
↧
deleting unused MDT combinations
Hi
While preparing a prototype scenario, I had used certain MDT combinations and used them for Planning. Out of these, few combinations were later found useless. As such I had deleted, all the KFs that I had uploaded for these combinations followed by the MDTs. But while creating "New View", I am still able to see these combinations which I had deleted.
While going through help doc, I found a certain Operator called "DELABDNCOMBOS".
Now, my questions are:
1) If I use this, will I be able to get rid of "only" the KF information related to these useless combinations whose MDTs I had deleted
2) Like Copy Or Group Operators, is there any parameters for this operator as well?
Regards,
Indaarjit
↧
↧
HCI user guide for setting up the connectivity
HI,
Please share some link or guide which can help us in learning about the HCI configuration.
Also, is there any dummy server where we can practice for setting up the connection with HCI and IBP.
Thanks,
Rohit Arora
↧
IP Locking issue when using Two Structures in Bex query
Hi All-
I am not able to lock the data when I am using two structures in SAP Bex query.
I have a local filter in a structure with Key figure. I expected that should take significance and should lock the data.
Since I have two structures, it is taking only what I use only in global filter in bex.
Can you please suggest if there is any workaround for this.
Thanks
SK.
↧
Mandatory value for characteristics in IP
Hi,
I'm trying for an easy way to check if the user feeds a field in a query of integrated planning.
For example: I do not want empty values for the characteristic 0MATERIAL.
If the value is empty, integrated Planning must not save the data.
Anyaone have an idea.
Kind regards
Rino Sica
↧